This is a brand new pair of Hi Beam (Inners) head light inserts with our premium HID KIT. The size is 4" x 6" and they suit. Landcruiser 80 series - all models. Landcruiser 61 and 62 series with rectangular lights.HID is the very brightest in lighting technology. The kit comprises 2 x Dedicated H1 Hi beam lights, 2 x H1 HID globes and 2 x 55w HID Ballasts (power transformers) and 2 x power leads plugged into the ballasts. You don't need anything else - it is totally complete and ready for insane super bright hi beams. The ballasts in this kit are 55W. Beware that most others on the market are 35W and large analog. Digital have a much longer life and warm up faster than Analog. They are also totally water proof and sealed on the inside too (pictured) so if they did in fact get water inside they are still not affected.
Speaking of waterproof, this HID kit can operate totally submerged in water with no bad side affects. Remove the outer metal retainer (4 screws) and the light falls forward into your hands. Just unplug the old and plug in the new. Re-position the light and screw in the retainer and you are done.There is no need to remove the grill or headlight surrounds. Note we now supply these in H1 with rubber boots. We have some copy cats out there but they still have H3 lights with no rubber boots. Your standard hi beams are typically just 65 Watts in halogen so these are considerably brighter.
Imagine 6 to 8 times better. So not just brighter light also significantly greater distance. And less watts too so less heat and your factory wires are ok with them. Also the ground switching of the Toyotas is not a problem with these. 2 x H1 High Beam lights - glass lenses and steel bodies with rubber boots.2 x 12v TPW (non Static) AC Digital Ballasts. 2 x Ballast mounting kits.
2 x Ballast power leads - come bundled with the globes. 2 x H1 XLX HID Globes.
A guarantee there will be no static on your radio - watch for that with others. 55W - watch others - most are just 35W and these are the best ballasts you can get.H1 metal base globes - not plastic bases like just about every other. Ballasts are AC Digital for faster brightness and longer globe life. Ballasts are slim 9.5cm x 6.5cm x 1.5cm. Remember not to touch the glass with your fingers, like all globes. If you finger the glass you leave a small oil deposit on the glass. That oil heats up to extreme temperature and the temperature difference between the non effected glass and the effected glass is so great it can break the glass. But as I said - this goes for any globe.